Underlay for vinyl flooring SELITBLOC® GripTec (SELIT)

Code: SELIT/70638 SELIT/70637 Choose variant
waterproof Made in Germany
Brand: selit
FREEFREE FREEFREE FREEFREE
WhatsApp Image 2023 05 18 at 13.07.38
€3,58 / m² €4,33 / m² from €3,58 / m² €4,30 incl. VAT €5,20 incl. VAT from €4,30 incl. VAT €53,43 / 1 pcs €44,18 / 1 pcs
In stock (99.9 m²) In stock at the supplier Choose variant
Variant

 

Underlay for vinyl flooring SELITBLOC® GripTec

THE underlay for vinyl and design floors – High level of pressure resistance and resilience

  • Protection against damage
  • Efficient impact sound insulation
  • GripTec surface to prevent the boards slipping
Thickness 1 mm 1.5mm
quantity of m2 in box 15 10.2
For heated floor yes yes
Dimensions ( m ) 1.2 x 12.5 1.2 x 8.5

 

 Taking possible only for the whole package

Detailed information

Product detailed description

Vinyl underlay for small installation heights with GripTec
SELITBLOC® GripTec is perfect for use as an underlay for vinyl or design floors, especially when the installation height is low. With its pressure-stable foam core, it reliably protects the floor from loads. In addition, despite its low material thickness, it provides significant sound insulation properties. The innovative GripTec surface prevents the boards from slipping and the joints from opening.

Technical data (according to EN 16354)

 
Order number 70638 70637
Punctual conformability (PC) up to 0.5 mm up to 1mm
Compressive strength (CS) ≥ 500 kPa ≈ 50 t/m² ≥ 500 kPa ≈ 50 t/m²
Compressive creep (CC) ≥ 35 kPa ≥ 35 kPa
Dynamic load (DL75) ≥ 250,000 cycles ≥ 250,000 Zyklen
Coefficient of friction μD (ISO 8295) ≥ 0.8 ≥ 0.8
Impact sound reduction (IS) up to 18 dB up to 20 dB
Water vapour diffusion resistance (SD) ≥ 100 m ≥ 100 m
Water absorption (EN 12087) ≤ 1 % ≤ 1 %
Thermal resistance (R) ∼ 0.03 m²K/W ∼ 0.04 m²K/W
Reaction to fire (RTF) Efl Efl
*Suitability for underfloor heating Yes, if flooring R ≤ 0.12 m²K/W

Yes, if flooring R ≤ 0.11 m²K/W

 

Easy to process

Easy to install
as a folding panel

 
 

 
 

Easy to cut
due to printed grid

 

Protects the floor

 

Protection in
uneven areas

Protection against
telegraphing



Prevents the boards
from slipping

 

Increases living comfort

Suitability for
underfloor heating*

Gentle on
the joints


Reduction of
walking sound

 

 

Reduction of
impact sound

 

Installing 1.5 mm GripTec –

a step-by-step guide

Before installation, please note: Before installation, check the base in accordance with CEN/TS 14472 and ensure that the quality of the base is suitable for proper processing. In general, the base should be clean, level, dry, resistant to tension and compression and should not contain any substances such as plasticisers, solvents or other diffusing substances. It must be ensured that the base is in a state of equilibrium humidity and that the CM value is below 2.0 % (for cement screed) or below 0.5 % (for anhydrite screed and anhydrite flowing screed). The processing instructions of the flooring manufacturer are to be observed as binding specifications.

 

 

Additional parameters

Category: Floor mat
Warranty: 2 years
Collection: Selit-selitbloc
Impact sound reduction: ~18dB, ~20dB
? Thickness: 1 mm, 1,5 mm

Be the first who will post an article to this item!

Do not fill out this field:

Be the first who will post an article to this item!

Do not fill out this field:

selit-logo